Installing the 4 Start Z Lead Screw Upgrade on Your Printrbot Simple

Click here if the video does not appear on your screen.

 

Have more questions? Submit a request

2 Comments

  • 0
    Avatar
    AleX Candela

    I have the G2 upgrade on my Simple Metal. M92 doesn't work for setting the steps. It's not set automatically. What are the M codes for that board?

  • 1
    Avatar
    Eric - PB Support Team

    Hi Alex,

    This page about the G2core firmware shows how to configure your motors.  https://github.com/synthetos/g2/wiki/Configuring-0.99-Motors#1tr-travel-per-revolution

    In this instance, you'll insert a command into your start gcode which will be read by your G2 before every print.  It'll look something like this:

    {1:{tr:2.54}}


    On the Plus I believe this number should be set to 40.64.

     

     

Please sign in to leave a comment.
Powered by Zendesk