Can I print directly from an SD card, without a computer?

*NOTE: This article does not apply to the Simple Pro

"I am looking at buying the new printrbot simple (all metal). The location of my home computer will not allow me to place the printrbot close enough to run a USB cable. I believe I read that the printrbot simple will print from an SD card. Is this true, and will I need to do some initial setup with the printer connected to the computer?" - Nate

Yes, you can! As a matter of fact, we recommend printing via SD.  It removes the hassle of connection issues.  It also eliminates the worry of your computer falling asleep in the middle of the print.  

Currently, all Printrbot Rev D and Rev F Printrboards come standard with both a USB port as well as microSD card slot. 

One way to print with the microSD card is to load a file (G-Code) on to the card and title it "auto0.g".  Insert the card into the Printrboard, power on the Printrbot and watch the bot raise to temp and just start printing!

Further Reading

 

Quick Tip

A lot of users like to wrap a small piece of tape around the end of their SD card.  This little hack gives you a tab to grab ahold of, making it easier to remove the card from your bot.

IMG_7446.JPG

Have more questions? Submit a request

1 Comments

  • 0
    Avatar
    Colbyparsonsemail

    Above you say "One way to print with the microSD card is to load a file (G-Code) on to the card and title it 'auto0.g'." That implies there is another way, but I cannot find another way described anywhere. This way frankly kind of sucks for workflow, because it makes it likely to lose track of which version of a file was printed, and it makes it difficult to prepare multiple files in advance.

Please sign in to leave a comment.
Powered by Zendesk